How to Root Xaiomi Redmi Note 3 and install TWRP

Released in November 2015, the Xiaomi Redmi Note 3 has a 5.5″ IPS LCD display, 2.0GHz octa-core MediaTek Cortex-A53 processor, and comes with either 2GB of RAM and 16GB internal storage, or 3GB of RAM with 32GB internal storage. The main shooter is 13MP with an f/2.2 aperture, while the front camera is 5MP with f/2.0 aperture. The Xiaomi Redmi Note 3 is powered by a large non-removable 4000mAh battery.

HOW TO ROOT?

• Make sure that you have a USB cable with you.
• Enable USB Debugging Mode on phone by following the below method.
• Make sure your pc is working properly.
• Charge your phone atleast to 80% as rooting may take a larger amount of time.
• Make sure that you have already created a backup of your phone.
• Finally the most important thing you must have is Patience .

NOTE:WE ARE NOT REPONSIBLE FOR ANY DAMAGE

'

Install TWRP  recovery in Xiaomi Redmi note 3 and Root it using computer /PC

1. First of all you have to download a zip file from here
2. Extract these files. To extract if you can use winrar or any software.
3. You have to disable driver signature in your pc.
4. Just open your menu. If you are using windows 10 and type cmd and run it as administrator.
5. Now type bcdedit/set test signing in the command prompt
6. Now just press the enter button and restart your pc
7. Go to the RN3root folder that we extracted.
8. Double click on the Mi phone.exe file and install it.
9. Then on your redmi note 3 goto settings then about phone option
10. Then go to additional settings turn on enable oem unlock and usb debugging.
11. Back up all the data if you have any on your phone copies it to your pc.
12. Then press volume down and power button to boot your phone in fastboot mode.
13. Now go back to the folder double click on edl batch file
14. Go back to start menu on your pc launch mi flash program.
15. Now select kenzo folder that is present inside RN3root and browse
16. Select the images folder and click on.
17. Go to advance settings from Browse option
18. At Nvboot script select NV flash all file from kenzo folder of RN3root.
19. Configure the raw xml, patch xml and flash programmer
20. Click ok and refresh this flashing process will take 5-10 minutes to complete
21. Now hard reboot the phone to do this do not disconnect the cable just press volume down +power button for 10-15 seconds and your phone will boot into fast boot mode.
22. Open unlock folder from RN3root and double click on check bat loader.static.bat file
23. Now your phone will automatically reboot.
24. Setup the phone as we normally do.
25. Again connect your phone to pc and copy update super su.zip file in your phone storage (Internal).
26. Now powers off your device once again boot your device into fast boot mode again by volume down + power button.
27. Go to the flash TWRP folder and click on flash TWRP file you have installed TWRP now.
28. Change the language of TWRP because by default its Chinese by pressing third right button (as its Chinese you will not understand then tap on globe icon and select English)
29. Go back on install and select that super su file that we installed and swipe to flash it.

                       Your phone is now rooted..!!😍

                       SUBSCRIBE OUR CHANNEL FOR MORE
                           ⬇⬇⬇⬇⬇⬇⬇
                      DJ Hacker